Managed Power Distribution Unit, 16 ports C13 220V 20A

front panel overview


Model: DMP-PDU-1-IP-MM-CC1420CC1316
Mains connectors:
  • Input power: 2x IEC C14;
  • Output power: 16x IEC C13
Outlet indicators: none
Ethernet interfaces: RJ45, 10MBit interface
  • The "Access Key" authentication;
  • the "Allowed Client IP restriction"
Mains Voltage: AC 220V (Europe, most of South America, Africa, Asia, Australia, New Zealand)
Power In: up to 20A total:
  • "Power 1 In": up to 10A
  • "Power 2 In": up to 10A
Outlets 1-8: Up to 10A total; up to 3A per outlet with inductive load, power factor cos=0.4; up to 7A per outlet with resistive load (power factor cos=1)
Outlets 9-16: Up to 10A total; up to 3A per outlet with inductive load, power factor cos=0.4; up to 7A per outlet with resistive load (power factor cos=1)
Mounting: 2U
Dimensions: 482.6 x 86 x 95 mm
Mass: < 2.45 kg


Controlling outlets

The device has an integrated web server through which the communication must occurs. The web server listens on the standard port number 80.

Command interface

Communication with the device occurs using http GET method queries. You can use any TCP client (such as a web browser) for communication with the device. Please use the following syntax: http://<device_ip>/[<command>[?<param_name>=<param_value>(&<param_name>=<param_value>)...]] Refer to the "API of the Device" chapter of the user manual for a reference of available commands, parameters and parameter values.

Graphical user interface

The Device does not have an integrated web GUI because of memory constraints. However, the web GUI can be hosted on one of your webservers running on your network. You have choices for setting up the web GUI:

Front pannel overview

front panel overview
  1. "Power 1 In" connector. Provides power for internal electronics and outlets 1 to 8
  2. "Power 2 In" connector. Provides power for outlets 9 to 16
  3. "Fuse 1" for outlets 1 to 8
  4. "Fuse 2" for outlets 9 to 16
  5. Outlets 1 to 8
  6. Outlets 9 to 16
  7. Ethernet interface RJ45 connector
  8. The "Sensor" connector, type "UA1A"; USB Type A socket (not compatible with standard USB devices) (1)
  9. The "Control Out" DB9 type "Serial Shift 1A" connector (not compatible with RS232) for Slave Modules (2)
  10. Hole with the "Restore Factory Defaults" button

Documentation: user manual (version 1.3)

Accessories (optional, not included)

Please contact us if yu are interested in these accessories.

Package Contents

Note: no cables are included.

Customer Service


We offer a limited one year warranty provided that the product has been used in compliance with the specifications. Once we get the product back we will inspect it to determine the cause of the failure. In case of the failure occured under proper usage conditions we will refund the product price plus two amounts of the original shipping cost. In case of the failure caused by improper use (such as physical damage or damage caused by customer's failure not complying with the specifications) we will not issue any refund.


Europe: $40
Worldwide $50

Note: Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.